Fuses and relays Hyundai ix35 / Tucson 2 (LM), 2009 - 2015

The ix35 is the successor to the first-generation Tucson. The car was presented at the Frankfurt Motor Show on 3 September 2009. In this article we will understand in detail fuse box diagrams Hyundai ix35 / Tucson 2 (second generation; LM index) 2009, 2010, 2011, 2012, 2013, 2014, 2015 years of manufacture.

Here you will find the locations and photos of the mounting blocks. Also, we will separately mark the fuse responsible for the fuel pump.

In the engine compartment

Depending on the type of engine installed (diesel or gasoline), there can be either one or two units.

Primary fuse box


Located on the left side of the engine compartment behind the battery.


Example of diagram from the back cover.

Type 1

The first version of the underhood unit description.

Diagram
Description A
FL1 Electric power steering 80
FL2 Instrument panel junction box 60
FL3 ESP and ABS control unit 40
FL4 EMS box 40
FL5 ESP and ABS control unit 40
FL6 Heater fan relay 40
FL7 Instrument panel junction box 60
FL8 Instrument panel junction box 60
FL9 Electro cooling fan 40
FL10 Heated tailgate glass 40
FL11 Headlight washer 30
FL12 Ignition switch (lock) 40
FL.13 Start relay, ignition switch 40
F14 Alarm siren relay 15
F15 Heated windshield 15
F16 Stop light 10
F17 All-wheel drive control unit 20
F18 Ignition coils, capacitor 20
F19 Start relay, automatic transmission parking/neutral position relay, MAF sensor, multifunction switch 7.5
F20 ESP, ABS and ICM control units, multi-purpose switch, glow plug relay unit, fuel filter water sensor, fuel filter heater relay 7.5
F21 Automatic transmission selector switch 7.5
F22 Fuel pump fuse 15
F23
  • Oxygen concentration sensor, cooling fan *.
  • Fuel pressure regulator valve **.
  • Engine lock module, CMP sensor, fuel pump relay, fuel pressure regulator valve, main pressure regulator valve ***
15
F24
  • Air conditioner, nozzles *.
  • Brake light, oxygen concentration sensor, air conditioning, cooling fan relay **. Crankshaft position sensor, oxygen concentration sensor, air conditioning ***
10
F25 Brake light switch *** 10
F26
  • RSM *
  • TCM ***
15
F27 Air conditioner 10
F28
  • TCM module, injection control solenoid valve, crankshaft position sensor, camshaft position sensor, oil control valve, canister purge solenoid valve*.
  • Cooling solenoid valve, (exhaust gas recirculation), VGT (gas distribution system) electric starter, automatic engine interlock module, CMP sensor, glow plug relay unit, oil level sensor **. EGR (exhaust gas recirculation) solenoid valve, VGT (timing system) electric starter, oil level sensor, engine cooling fan ***.
10
F29 Ignition coils *, ECM **, ECM *** 20
FL30 Engine control relay 30
R1 Fuel pump relay
R2 Air conditioner relay
R3 Engine control relay (main relay)
R4 Brake Warning Relay / Headlight Washer Relay
R5 Wiper relay (rain sensor)
R6 Wiper relay (slow mode)
R7 Fan relay
R8 Horn relay
R9 Relay - high speed electric cooling fan
R10 Heated windscreen relay
R11 Engine control relay
R12 Climate system electric fan
R13 Horn relay
R14 Cooling fan relay (low)
R15 Starter relay
R16 Audible burglar alarm relay
R17 Heated rear window relay
Type 2

The second option for describing the underhood unit.

Diagram
Name Description Amps
MDPS MDPS Unit 80
B+1 Smart Junction Box (DR LOCK 15A, HAZARD 15A, PDM 15A, S/HEATER RR 15A) 60
ABS 2 Multipurpose Check Connector, ESC Module 40
ECU 4 EMS Box (TCU 1 15A, ECU 3 30A, A/CON 10A, F/PUMP 15A) 40
ABS 1 Multipurpose Check Connector, ESC Module 40
BLOWER Blower Relay 40
B+3 Smart Junction Box (P/SEAT(DRV) 20A, SAFETY POWER WINDOW 20A, SMART KEY 10A, MODULE 5 7.5A, Power Connector (AUDIO 1 10A, ROOM LAMP 10A), IPS-1CH, IPS-2CH) 60
B+2 Smart Junction Box (Power Window Relay, SUNROOF 15A, AMP 25A, IPS-1CH) 60
C/FAN Engine Room Fuse & Relay Box (C/FAN LO Relay, C/FAN HI Relay) 40
RR HTD Engine Room Fuse & Relay Box (RR HTD Relay) 40
B+ 4 Engine Room Fuse & Relay Box (H/LAMP HI 10A) 30
IG 1 Ignition Switch, PDM Relay Box (IGN 1 Relay) 30
IG 2 Engine Room Fuse & Relay Box (Start Relay), Ignition Switch, PDM Relay Box (IGN 2 Relay) 40
HORN Engine Room Fuse & Relay Box (Horn Relay, B/A Horn Relay) 15
DEICER Engine Room Fuse & Relay Box (Deicer Relay) 15
STOP LAMP Stop Lamp Switch, Stop Signal Electric Module, Smart Key Control Module 10
AMS Battery Sensor 10
4WD 4WD ECM 20
H/LAMP HI Engine Room Fuse & Relay Box (H/LAMP HI Relay) 10
ECU 2 PCM/ECM, Clock Spring 7,5
ABS 3 Multipurpose Check Connector, ESC Module 7,5
TCU 2 Transmission range switch (A/T), Vehicle speed sensor (M/T), Reverse light switch (M/T) 15
F/PUMP EMS Box(F/PUMP Relay) 15
SENSOR 4 E/R Fuse & Relay Box(C/FAN HI, LO Relay), EMS Box(F/PUMP Relay), Oxygen Sensor (Up, Down) 15
SENSOR 3 EMS Box (A/CON Relay) 10
SENSOR 2 (Not Used) 10
SENSOR 1 PCM 10
TCU 1 EMS Box (A/CON Relay) 15
A/CON Immobilizer module, crankshaft position sensor, camshaft position sensor 1/2, oil control valve 1/2, purge control solenoid valve, variable intake manifold valve, canister closing valve 10
ECU 1 Ignition Coil (#1, #2, #3, #4), Condenser 20
ECU 3 EMS Box(Engine Control Relay) 30

Additional block


Installed on models with a diesel engine.


Main fuse


On many Hyundai ix35 vehicles, the main power fuse is located on the positive terminal of the battery.


ALT - alternator 150A.

In the passenger compartment


Located under the dashboard; to access, remove the protective cover in the direction of the arrow.


General view of the Hyundai ix35 / Tucson interior fuse box.

Diagram
Description
Related fuse diagrams
Comments
Be the first to comment. Nobody responded to this post yet.
Add new comment