Fuses and relays Fiat Panda (319; 2011 - 2020)

Fiat Panda is a city car of the Italian company, which is part of the Stellantis association. The third generation of the car was presented in autumn 2011 at the Frankfurt Motor Show. In this material, we will analyze in detail the fuse diagrams for the 3rd generation Fiat Panda (3192011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 release.

General view of the car
Here you will find the locations and photos of the fuse blocks. Separately, we note the elements responsible for the cigarette lighter and the fuel pump.

In the engine compartment

The location of the fuse boxes in the engine compartment of the car.
The main unit
 is located on the right side of the engine compartment behind a protective cover. On the positive terminal of the battery there is an additional board consisting of power fuse-links.


General view of the main block.

Diagram of the underhood fuse box
No. Description A
1 electric sliding sunroof 20
2 Brake system 20
3 Egnition lock 20
4 air conditioner fan 40
5 ABS pump 40
6 Horn 15
7 Air conditioning compressor 7.5
8 Two speed cooling fan or not used 40
9 Electric power steering 70
10 Two speed cooling fan or Single speed cooling fan 20/30
11 Body control unit 60
12 Heated Fuel Filter, Diesel Or Empty 50
13 Heated windshield 70
14 Transmission pump or Glow plug control unit 50/30
15 Fuel module (fuel pump fuse) 15
16 Socket 12 V / Cigarette lighter fuse Fiat Panda 3 15
17 Headlights, high beam 15
18 Fog lights 15
19 Battery sensor 5
20 Heated seats 15
21 Engine management system or not 7.5
22 heater fan 5
23 Automatic transmission or Differential control unit or CNG injectors 7.5/10
24 Gas Supply Relay or CNG Relay 7.5
25 Engine Management System or Fuel Delivery Module or CNG Injectors 10
26 Engine management system or LPG control unit 15
27 Engine management system 10
28 Heated mirrors 7.5
29 Brake system / Electric power steering 7.5
30 Engine management system or automatic transmission or CNG injector 7.5
31 Reversing light switch or Reserved 5
32 Rear window heating 30
R1 Cooling fan, high speed relay
R2 Engine management system
R3 Rear window heating
R5 heater fan
R6 single speed cooling fan relay
R7 Fuel filter heater, diesel
R8 fog lights
R9 sound signal
R10 Fuel pump relay
R11 air conditioning fan
R12 air conditioning compressor
R13 headlights, high beam
R14 12V sockets / Cigarette lighter relay
R15 CNG relay or Engine start/stop switch
R16 Gas Supply Switch / Start and Stop System / CNG Relay
Power battery board
No. Description Current, A
SA1 Battery sensor thirty
SA2 Heater PTC 1 thirty
SA3 Heater PTC 2 50

In the passenger compartment

Location of the fuse box in the passenger compartment.
It is located on the driver's side, at the bottom of the dashboard.


Photo - an example of execution.

Fiat Panda Cabin Fuse Block Diagram
No. Description A
F12 Not used -
F13 headlight range control potentiometer 5
F31 Power outlet 5
F32 Not used -
F36 Diagnostic connector / Voltage regulator(s) / Power supply 10
F37 Stoplight Switch / Dashboard 7.5
F38 central locking 20
F43 Front and rear washer pumps 20
F47 Window regulator on the driver's side 20
F48 Passenger side power window 20
F49 Parking sensor / Brake control module / Heated seats / Transmission solenoid / Information display / Lighting control 7.5
F50 Airbag 7.5
F51 Radio / Climate Control / Brake Pedal Switch / Clutch Pedal Switch / Power Sunroof / Reverse Light 5
F53 Instrument Panel Power 7.5

In the trunk

location of the fuse and relay box in the luggage compartment of the car
On the left side of the trunk is another box with fuses and relays.

Diagram
No. Decryption A
1 Brake system 5
2 Reserve -
3 Reserve -
4 Reserve -
5 Reserve -
6 Reserve -
7 Reserve -
8 Reserve -
R1 Heated passenger seat
R2 Heated driver's seat
R3 Reserve
R4 Brake system
Related materials
Add new comment